Diacetone Alcohol CAS 123-42-2

123-42-2 – Names and IdentifiersName4-Hydroxy-4-methyl-2-pentanoneSynonymsTyrantonDiacetoneDike

Email: info@standard-groups.com

Konten

123-42-2 – Names and Identifiers

Nama	4-Hydroxy-4-methyl-2-pentanone
Sinonim	Tyranton Diacetone Diketone Alcohol Diacetone alcohol Diaectone alcohol TIMTEC-BB SBB009084 (CH3)2C(OH)CH2C(O)CH3 Acetonyldimethylcarbinol 2-methyl-2-pentanol-4-one 2-Methylpentan-2-ol-4-one 2-Methyl-3-pentanol-4-one 4-hydroxy-4-methylpentan-2-one 4-Hydroxy-4-methyl-2-pentanone 4-Methyl-4-Hydroxy-2-pentanone 2-Hydroxy-2-methyl-4-pentanone 2-Pentanone, 4-hydroxy-4-methyl- 4-Hydroxy-2-keto-4-methylpentane Diacetone Alcohol 〔4-Hydroxy-4-methyl-2-pentanone〕
CAS	123-42-2
EINECS	204-626-7
InChI	InChI:1S/C6H12O2/c1-5(7)4-6(2,3)8/h8H,4H2,1-3H3

123-42-2 – Physico-chemical Properties

Rumus Molekuler	C6H12O2
Massa Molar	116.16
Kepadatan	0.938 g/mL at 20 °C
Titik Melting	-42.8 °C
Titik Boling	166°C(lit.)
Titik Flash	132°F
Kelarutan air	MISCIBLE
Solubilitas	Soluble in alcohol, ether (Weast, 1986), and many other solvents, particular ketones such asacetone and 2-butanone.
Tekanan Vapor	<1 mm Hg ( 20 °C)
Densitas Vapor	4 (vs air)
Penampilan	Liquid
warna	Kosongkan tanpa warna
Bau	Mild, pleasant.
Batas eksposisi	TLV-TWA 240 mg/m3 (50 ppm) (ACGIH);IDLH 2100 ppm (NIOSH).
Panjang gelombang maksimum (λmax)	[‘249nm(lit.)’]
Merck	14,2964
BRN	1740440
pKa	14.57±0.29(Predicted)
Kondisi penyimpanan	Simpan di bawah +30°C.
Stabilitas	Stable. Flammable. Incompatible with strong oxidizing agents, amines, ammonia, strong acids, strong bases, alkalies, aluminium.
Batas ledakan	1.8-6.9%(V)
Indeks Refraksi	n20/D 1.423(lit.)
Sifat fisik dan kimia	Colorless flammable liquid with pleasant odor. melting point -44 ℃ boiling point 164 ℃ relative density 0.9387 refractive index 1.4213 flash point 12.7 ℃ , halogenated hydrocarbons, ethers and water miscible.
Penggunaan	Used as high boiling point solvent, paint thinner, Wood colorant, rust remover and dye raw materials

123-42-2 – Risk and Safety

Simbol Bahaya	Xi – Irritant
Kode Risiko	R36 – Irritating to the eyes
Deskripsi Keselamatan	S24/25 – Avoid contact with skin and eyes.
ID PBB	UN 1148 3/PG 3
WGK Jerman	1
RTECS	SA9100000
FLUKA BRAND F KODE	9
TSCA	Ya
Kode HS	2914 40 10
Kelas Bahaya	3
Kelompok Kemasan	III
Toksitas	LD50 orally in rats: 4.0 g/kg (Smyth)

123-42-2 – Upstream Downstream Industry

Material Raw

Phthalic anhydride
Acetone

Downstream Products

Mesityl oxide, mixture of alpha- and beta-isomers

123-42-2 – Reference Information

Concentration	0.1 mCi/ml
Specific Activity	25-50 mCi/mmol
Solvent	Ethanol
LogP	-0.09 at 20℃
Penggunaan	diacetone alcohol is one of the important derivatives of acetone, used in the preparation of metal detergents, wood preservatives, hydraulic oil solvents; diacetone alcohol can be used for the preparation of methyl isobutyl ketone, methyl isobutyl methanol, hexenediol, phenyl oxygen, isophorone and other intermediates; Diacetone alcohol can be used as paint, celluloid, nitrocellulose, fat, oil, wax, dyes and resin solvents; Diacetone alcohol can be used as photographic film preservatives, antifreeze, extractants, pharmaceutical intermediates, special comonomers, organic synthesis of raw materials. diacetone alcohol is an intermediate in the process of preparing isopropylidene acetone, methyl isobutyl ketone, methyl isobutyl methanol, hexylene glycol, chlorone and isophorone from acetone. Diacetone alcohol can be used to prepare metal detergents, wood preservatives, photographic film and drug preservatives, antifreeze, hydraulic oil solvents, extractants and fiber finishing agents. Diacetone alcohol is widely used as a solvent for electrostatic paint, celluloid, nitrocellulose, fats, oils, waxes and resins. used as raw materials of high boiling point solvent, paint thinner, Wood colorant, rust remover and dye, etc. used as raw materials of dye and resin solution cellulose acetate and esterified cellulose, A solvent for celluloid and the like. Biochemical studies. Electrophoretic analysis. Wood preservatives.
persiapan	1) preparation of catalyst metal aluminum plate (thickness 0.1, purity 99.0%) in order to remove the natural oxide layer on the surface of metal aluminum, the natural oxide layer was immersed in 20% NaOH solution for 3min, and then immersed in 30% HNO3 solution for 1min. After the treatment, the aluminum plate was used as the anode, the lead plate was used as the cathode, the mass fraction of oxalic acid was 4% as the electrolyte, the current density was 1.5A/dm2, the temperature was 20, after anodizing for Al2O3-Al H, the first carrier was made into the form of a Rasch ring filler with a diameter of about 3mm, and water-sealed in a water bath at 80 ° C. For H, the carrier was prepared by calcination at 350 °c for 1H. The catalyst carrier is immersed in a certain concentration of Mg(NO3)2 solution, stirred at a certain temperature for a certain time, drying in an oven at 125 C for more than 8H. The MgO/Al2O3-Al solid base catalyst was prepared by calcining at a certain temperature for a certain time. 2) acetone condensation reaction The condensation reaction was carried out in a 250ml three-necked flask, the reaction temperature was controlled with a contact thermometer, and heated and stirred with a SZCL type digital display temperature control magnetic stirrer. The catalytic reaction was carried out under boiling condition, adding GC-14C ml of raw material acetone, 2g of catalyst, without adding water-carrying agent, and the reaction time was 1H. The product was analyzed by gas chromatograph, The activity of the catalyst was expressed in terms of acetone conversion. The results showed that the optimum preparation conditions were as follows: impregnation concentration 2.0%, impregnation temperature 55 ℃, impregnation time 2.0h, calcination temperature 550 ℃ and calcination Time 4.0h. Under these conditions, the conversion of acetone was 21.08% and the selectivity of diacetone alcohol was 100%.
metode produksi	is obtained by condensation of acetone under alkaline conditions. 1250kg of acetone was consumed per ton of product.
kategori	flammable liquid
kelas toksik	poisoning
Toksikitas akut	oral-rat LD50: 4000 mg/kg; Oral-mouse LD50: 3950 mg/kg
stimulation data	Skin-rabbit 500 mg mild; Eye-rabbit 20 mg severe
explosive hazard characteristics	explosive when mixed with air
karakteristik bahaya kebakaran	flammable in open flame, high temperature, strong oxidant; combustion emissions
karakteristik penyimpanan dan transportasi	The package is complete, light and light unloading; The warehouse is ventilated, away from open flame, high temperature, separate from oxidant
fire extinguishing agent	foam, dry powder, carbon dioxide, sand
Occupational Standard	TLV-TWA 50 PPM (240 mg/m3); Tel 75 PPM (360 mg/m3)
suhu pembakaran spontan	640°C
immediate life-and health-threatening concentrations	1,800 ppm [10% LEL]

Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.

Sebelumnya:Epoxy resins

berikutnyaSolid Acrylic Resin

Pesan Online

Informasi Kontak

Telepon Perusahaan

+86-21-6420 0566

Jam kerja

Senin sampai Jumat

Telepon seluler:

13816217984

Email:

info@qinsun-lab.com