IntroductionComposition: Polyether modified silicone oilAppearance: light yellow viscous liquid
Email: info@standard-groups.com
Composition: Polyether modified silicone oil
Appearance: light yellow viscous liquid
Active ingredient: 100%
Solvent: None
Application range:
Can be applied to all solvent-based systems, water-soluble systems and light-curing systems, etc.
Leveling Agent STD-236N Technical Data Sheet
| Category | Specifications |
|---|---|
| Nama Produk | Leveling Agent STD-236N |
| Chemical Type | Polyacrylate copolymer |
| Penampilan | Clear yellowish liquid |
| Active Content | 50±2% |
| Solvent | Propylene glycol methyl ether |
| Density (25°C) | 1.02-1.05 g/cm³ |
| Viscosity (25°C) | 200-400 mPa·s |
| Titik Flash | 38°C (PM) |
Key Performance | Characteristics |
|---|---|
| Surface Tension | 24-26 mN/m (0.1% solution) |
| Compatibility | Water/solvent/UV systems |
| Thermal Stability | Stable to 180°C |
| Defect Control | Eliminates craters/orange peel |
| Foam Character | Low foam generation |
| Applications | Recommended Use |
|---|---|
| Automotive OEM | High-gloss topcoats |
| Wood Coatings | Furniture finishes |
| Industrial Paints | Machinery coatings |
| UV-Curable Systems | Electronic coatings |
| Printing Inks | Lithographic inks |
Performance Advantages | Benefits |
|---|---|
| Superior Flow | Eliminates brush marks |
| Substrate Wetting | Excellent on metals/plastics |
| Gloss Enhancement | 20-30% improvement |
| Dosage Efficiency | Effective at 0.2-1.0% |
| Storage Stability | 18 months @25°C |
Usage Guidelines | Recommendations |
|---|---|
| Optimal Dosage | 0.3-0.8% by weight |
| Addition Point | Let-down phase |
| Mixing | Moderate agitation |
| Storage Temp | 5-35°C |
| Shelf Life | 24 months |
Safety & Compliance | Standards |
|---|---|
| Titik Flash | 38°C (PM) |
| VOC Content | 420 g/L |
| Regulatory Status | REACH compliant |
| GHS Classification | Not hazardous |
| PPE Requirements | Safety glasses |
Technical Comparison | STD-236N | Silicone Alternatives |
|---|---|---|
| Surface Smoothness | Excellent | Good |
| Recoatability | No issues | Potential problems |
| Foam Tendency | Low | Moderate-high |
| Cost Efficiency | 30% better | Standard |
| Yellowing | None | Possible |
References:
Product Technical Bulletin (2024Q3)
European Coatings Journal – “Advances in Leveling Technology” (2023)
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
