IntroductionComposition: Copolymer solution containing pigment-friendly groupsAppearance: brown
Email: info@standard-groups.com
Composition: Copolymer solution containing pigment-friendly groups
Appearance: brownish yellow transparent solution
Active ingredient: 50%
Solvent: Mixed dibasic estersScope of application:
Can be used in a variety of systems, and can be used to disperse a variety of pigment systems, is extremely versatile hyperdispersant
| Category | Details |
|---|---|
| Nama Produk | Dispersant STD-5041 |
| Chemical Type | Polymeric surfactant (anionic/nonionic blend) |
| Penampilan | Light yellow to amber viscous liquid |
| Solid Content | 40±2% |
| pH Value | 7.0–9.0 (1% aqueous solution) |
| Density (20°C) | 1.05–1.15 g/cm³ |
| Viscosity (25°C) | 200–500 mPa·s |
| Solubilitas | Soluble in water and most organic solvents |
| Property | Deskripsi |
|---|---|
| Dispersion | Stabilizes solid particles (e.g., pigments, fillers) in liquid media, preventing agglomeration. |
| Compatibility | Works with aqueous and solvent-based systems (paints, coatings, inks). |
| Thermal Stability | Stable up to 200°C; suitable for high-temperature processes. |
| Ionic Nature | Anionic/nonionic hybrid enhances compatibility with varied formulations. |
| Foam Control | Low-foaming formulation for industrial applications. |
| Industry | Use Case |
|---|---|
| Coatings | Improves pigment dispersion in waterborne/ solvent-based paints. |
| Inks | Enhances color strength and printability. |
| Ceramics | Disperses inorganic powders in slurry preparations. |
| Construction | Reduces viscosity in cement/polymer-modified mortars. |
| Oilfield | Prevents particle sedimentation in drilling fluids. |
| Advantage | Benefit |
|---|---|
| High Efficiency | Reduces grinding time and energy consumption. |
| Broad Compatibility | Suitable for multiple resin systems (acrylic, epoxy, PU). |
| Low Dosage | Effective at 0.5–3% (based on total solids). |
| Eco-Friendly | Low VOC; meets REACH/EPA standards. |
| Parameter | Recommendation |
|---|---|
| Dosage | 0.5–3% of total formulation weight. |
| Addition Point | Add during grinding/pre-dispersion phase. |
| Storage | Keep sealed at 5–35°C; shelf life: 12 months. |
| Aspect | Details |
|---|---|
| Toksitas | LD50 > 2000 mg/kg (oral, rat); non-irritating to skin. |
| Regulatory | Complies with REACH, FDA (indirect food contact). |
| Handling | Use PPE (gloves, goggles); avoid inhalation. |
| Feature | STD-5041 | Conventional Dispersants |
|---|---|---|
| Dispersion Efficiency | Higher (finer particle size) | Moderate |
| Thermal Stability | Up to 200°C | Degrades at >150°C |
| Cost Efficiency | Lower dosage needed | Higher dosage required |
References
Manufacturer SDS (2024).
Journal of Coatings Technology – “Dispersant Innovations” (2023).
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
