125051-32-3 - Names and IdentifiersNameBis(2,6-difluoro-3-(1-hydropyrro-1-yl)-phenyl)titanocene
Email: info@standard-groups.com
| Nama | Bis(2,6-difluoro-3-(1-hydropyrro-1-yl)-phenyl)titanocene |
| Sinonim | LS 784 )phenyl]- Irgacure 784 photo sensitizer 784 cyclopenta-1,3-diene bis(2,6-difluoro-3-pyrrol-1-yl-phenyl)titanium bis(cyclopentadienyl)bis(2,6-difluoro-3-(1H-pyrro BIS(2,6-DIFLUORO-3-(1-HYDROPYRROL-1-YL)PHENYL)TITANOCENE Bis(2,6-Difluoro-3-(1-Hydropyrrol-1-Yl)Phenyl)Titanocene Bis(2,6-difluoro-3-(1-hydropyrro-1-yl)-phenyl)titanocene titanium,bis(.eta.5-2,4-cyclopentadien-1-yl)bis[2,6-difluoro-3-(1h-pyrrol-1-yl Bis(.eta.5-2,4-cylcopentadien-1-yl)-bis(2,6-difluoro-3-(1H-pyrrol-1-yl)-phenyl)titanium Bis(.eta.5-2,4-cylcopentadien-1-yl)-bis(2,6-difluoro-3-(1H-pyrrol-1-yl)-phenyl) titanium |
| CAS | 125051-32-3 |
| EINECS | 412-000-1 |
| InChI | InChI=1/2C10H6F2N.2C5H6.Ti/c2*11-8-3-4-10(9(12)7-8)13-5-1-2-6-13;2*1-2-4-5-3-1;/h2*1-6H;2*1-4H,5H2;/rC20H12F4N2Ti.2C5H6/c21-13-5-7-15(25-9-1-2-10-25)17(23)19(13)27-20-14(22)6-8-16(18(20)24)26-11-3-4-12-26;2*1-2-4-5-3-1/h1-12H;2*1-4H,5H2 |
| Rumus Molekuler | C30H12F4N2Ti |
| Massa Molar | 524.3 |
| Kepadatan | 1.43 at 20℃ |
| Titik Melting | 160-170°C |
| Tekanan Vapor | 0-0.001Pa at 25-50℃ |
| Penampilan | Bubuk |
| Kondisi penyimpanan | below 5° C |
| Sensitif | 4: no reaction with water under neutral conditions |
| Kode Risiko | R36/37/38 Irritasi pada mata, sistem pernapasan dan kulit. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R62 - Possible risk of impaired fertility R48/22 - Harmful danger of serious damage to health by prolonged exposure if swallowed. Please take the official translations! You find them here: http: // europa. eu. int/ eur- lex/ lex/ LexUriServ/ LexUriServ. do? uri=CELEX: 32001L0059: EN: HTML |
| Deskripsi Keselamatan | S26 - Jika kontak dengan mata, bilas segera dengan banyak air dan minta saran medis. S36/37/39 Pakai pakaian pelindung, sarung tangan dan perlindungan mata/wajah yang sesuai. S61 - Hindari pelepasan ke lingkungan. Lihat instruksi khusus / lembar data keselamatan. [UNK] S36/37 Pakai pakaian dan sarung tangan pelindung yang sesuai. Please take the official translations! You find them here: http: // europa. eu. int/ eur- lex/ lex/ LexUriServ/ LexUriServ. do? uri=CELEX: 32001L0059: EN: HTML Please take the official translations! You find them here: http: // europa. eu. int/ eur- lex/ lex/ LexUriServ/ LexUriServ. do? uri=CELEX: 32001L0059: EN: HTML Please take the official translations! You find them here: http: // europa. eu. int/ eur- lex/ lex/ LexUriServ/ LexUriServ. do? uri=CELEX: 32001L0059: EN: HTML |
| TSCA | Ya |
| LogP | 9.5 at 20℃ |
| surface tension | 72.4mN/m at 10g/L and 20 ℃ |
| Informasi kimia EPA | Informasi yang disediakan oleh: ofmpub.epa.gov (link eksternal) |
| introduction | photoinitiator 784 is a very active orange solid photoinitiator with good photoactivity, thermal stability and low toxicity. as a reactive diluent, it is mainly used for UV and visible light curing of unsaturated prepolymers together with single or multi-functional vinyl monomers and oligomers. Especially suitable for imaging or information storage photosensitive resin curing in high-tech content and high value-added fields, information storage equipment, such as photosensitive layer, holography, laser direct imaging, three-dimensional flat printing, etc. It can initiate the polymerization reaction of unsaturated resin under the action of visible light or ultraviolet light. Curing can be carried out under ultraviolet light, visible light or even suitable laser irradiation, such as Ar-laser (488nm) and FD-Nd/YAG-laser (532nm). The curing performance obtained by isolating oxygen during the curing process. |
| advantages | 1. it has high photosensitivity and high sensitivity from ultraviolet to visible light 2. it can effectively cure thick films and can cure coatings with a thickness of more than 70 μm 3. it is suitable for dark light curing coatings 4. safety, environmental protection and hygiene |
| features | its photoinitiation process is neither a cracking type nor a hydrogen capture type. Due to the special photoinitiation mechanism of 784, it is very suitable for thick coatings and dark curing systems. It can cure coatings with a thickness of more than 70um and black, red and high pigment coatings; plus 784 ultra-wide ultraviolet and visible light absorption The spectrum band can make full use of the light source, so it has high photosensitive sensitivity and photoinitiation activity. In addition, the photolysis fragments are complexed by acrylate and do not migrate to the surface, so they are safe and environmentally friendly. In addition, 784 have good thermal stability. table 1 shows the specifications and physical characteristics of photoinitiator 784 |
| menggunakan | UV paint, UV ink, UV adhesive |
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
